Anti-fog Method of Motorcycle Helmet Lens

Anti-fog method of motorcycle helmet lens
1. Buy a lens, the premise is a brand helmet, and remember the model. The second method is to buy some polishing powder, and use a deerskin lens cloth to wipe the lens. Just use fine powder directly, and it will be as bright as new.
2. Saliva Many people often use saliva to smear the inside of swimming goggles when swimming to prevent fog, but the effect is not obvious on the lens of the helmet. And because the saliva applied is not uniform, there are a lot of irregular lines on the lens. This method is reluctant to try it out in an emergency, but it is not suitable for regular use.
3. The original anti-fog treatment Some helmet lenses have been coated with an anti-fog coating on the inner layer of the lens when they leave the factory. After testing, the anti-fog effect is still good, but after the moisture accumulates to a certain extent, the lens may There is no fogging, but it distorts the vision of the lenses slightly.
4. Neutral cleaners Neutral cleaners are used to treat the lens. The amount used is very small. Evenly applied to the inner side of the lens can achieve the effect of anti-fog. However, when the humidity level is too high, the anti-fog effect will be greatly improved. Lower, so this method is still reluctant.
5. Anti-fog patch The anti-fog patch is more expensive than the general one, but the anti-fog effect is immediate, and the anti-fog patch also has the function of automatic discoloration and anti-dazzle, but the inner layer of this lens needs Keep it dry, otherwise the anti-fog effect will be greatly reduced, but the anti-fog patch cannot be reused after one use, which is a small regret.
 6. Anti-fog treatment Spray-type anti-fog agents are more professional than cleaners and saliva, and the actual effect is indeed more obvious, but it takes a lot of effort in the specific operation, so unless you clearly know that you will It's raining, otherwise this method is really inconvenient.