The role of Each Part of the Motorcycle Helmet

The role of each part of the motorcycle helmet
1. Hat Shell: The hard shell of the outer layer of the helmet. In the event of an accidental collision, the cap shell is the first line of defense to protect the head from dispersing the impact.
2. Cap body: the foam inner layer inside the helmet. It is the second line of defense to protect the head. It is mainly used to absorb the impact impulse in the accident and reduce the accident injury.
3. Buckle and chinstrap (safety belt): used to fix the helmet position. The chinstrap is fixed under the ears on both sides, and the buckle is fixed at the throat Note: After the buckle is fastened, leave 1 to 2 fingers for the buckle and the throat
space, neither too tight nor too loose.
4. Air holes: The role of the air holes is to help cool and ventilate the head and keep the hair dry on long rides. The more air holes, the cooler the rider feels, but the lower the relative safety factor. generally
Choose a helmet with the right amount of air holes
5. Knob: There is a knob for adjusting the tightness behind the motorcycle helmet. The driver can adjust the size of the helmet according to the size of the head.
6. Seat cushion: The seat cushion can absorb the sweat and slight vibration from the human body during riding.
Regularly clean and maintain the helmet to keep the helmet in a good protective state, so that the driver has a safe driving state;
1. Internal cleanliness of the helmet: After long-term use, dirt will accumulate inside and produce peculiar smell. In this case, it should be cleaned. The cleanser used is neutral, the shampoo is better. in order to avoid
The smell of the cleaner is left and the dosage should be controlled. Pay attention to the scrubbing process, do not use too much force, otherwise the cushioning material will be deformed. After cleaning, wipe off the moisture with a towel, and place it in a ventilated place naturally
Air dry.
2. Helmet surface maintenance: Compared with the inside of the helmet, the surface of the helmet is more likely to be dirty, so the surface is often wiped. When there is a stain on the helmet, wipe the stain with a damp cloth first, then use car water
Wax or light wax wipes to keep the helmet clean and bright, or use a helmet-specific brightener for better results.
3. Maintenance of helmet goggles: Since goggles are transparent devices, be extra careful when wiping. When cleaning the goggles, add a neutral detergent to the water, rub it with your hands, and then rinse with tap water.
Bottom wash, then dry with a soft cotton cloth or paper towel. Afterwards, wiping water wax or antistatic agent on the outer surface can reduce the adhesion of dust and accelerate the flow of rainwater. The inside of the goggles should be coated with
fog, which plays an important role in reducing fog adhesion at night.