Precautions for the Use of Motorcycle Helmet Parts

Precautions for the use of motorcycle helmet parts
1. When buying a helmet, it is necessary to confirm whether there is relevant certification. In addition, remember to pay attention to the service life of the helmet, usually 3-5 years. If the helmet is impacted by external force, although the appearance is not damaged, the internal buffer material It has been deformed and cannot provide effective protection, please do not use it again.
2. After the actual wind tunnel test, the helmet will be marketed only if it has practical effect. It integrates the design of the opening above the lens, the opening of the chin and the neck deflector. When the opening of the chin is opened, the mist on the mirror surface can be successfully taken away, which greatly improves the performance of the helmet. Efficiency of fog removal.
3. The high-quality lens adopts a safety design, which is not only not easy to be damaged, but also will never be broken. That is to say, no matter how twisted, bent, and hit, it will not be broken at most if it is cracked. There is no need to worry about being cut by fragments, and the lens itself is 3D three-dimensional molding, not very thick, so there is almost no image dispersion.
4. Every helmet pursues a comfortable inner lining, usually including the main padding above the head, and the ear pads on both sides of the ears. A good inner lining not only helps the head and helmet body fit tightly, but also has the function of shock absorption. Most high-quality helmet linings can be removed and washed when they are dirty, and there are different thicknesses that can be purchased and replaced by yourself to achieve a helmet that truly suits your face shape.
5. When we wear the helmet, we must not be careless or lazy and fail to fasten the safety buckle of the strap. High-quality helmet straps have undergone strict pulling tests. The double D-ring fixed buckle is currently a relatively safe safety buckle. Only when it is buckled can it prevent the tragic occurrence of the helmet flying out in the event of an accident.
6. When buying a safety helmet, you should measure your head circumference first, and get the result size by measuring the widest part of the head above the eyebrows. The new helmets are usually a bit tight, and it is normal to have the face and cheeks. If the temples and the top of the head feel obvious pressure, they are too small. Wearing a helmet with a small size for a long time will cause headaches. Shake your head from side to side so that the helmet does not feel visibly shaken. If the shaking test helmet is too large, the oversized helmet will not only leak air during driving, but most importantly, it will shake violently when driving at high speed, and the situation will also start to be effectively protected. The helmet is the most important safety equipment and must be the right size.
7. For beginners, it is recommended to buy brighter helmets, which are more eye-catching. Please avoid self-painting or spray painting, many paints are corrosive. To clean the helmet, please use water or a helmet-specific cleaner.
8. According to the survey, 75% of motorcycle riders do not have the habit of cleaning their helmets. They sweat when riding, and the inside is not easy to ventilate, which is easy to breed bacteria. Unclean helmets worn by riders may cause scalp diseases. Remember to put the helmet upside down in the sun when the weather is fine. Some knights use water washing to clean the inner lining of their helmets, and pay attention to drying them in time. Nowadays, many knights also choose special cleaning agents for helmets to clean their helmets more quickly and effectively.